Modern Masters Metallic Paint

Description

Modern Masters Metallic Paint has been manufacturing water base, metallic paints since the 1970s, setting us apart from the competition. Our continued focus on metallic finishes has made us a global leader in decorative, metallic paints. When it comes to choosing a metallic paint for a do-it-yourself project to a large architectural specification, Modern Masters has metallic paint suitable for the job!

This product line is the industry standard in Metallic Paint. There is a color for every project with 49 standard colors, which include 5 sheer colors and 9 recently added new colors.  In addition you can intermix any Metallic Paint Collection colors to create your own custom color.  We also offer exclusive custom color matching service to the trade.

Modern Masters Metallic Paint is Formulated with the same shimmering particles and ease of application as our original “Satin Sheen” Metallic Paints but with a Matte finish. Besides the Matte finish, the do exhibit some unique qualities versus their counterparts, like holding the pattern created by stiff brushes or paint pads. Watch our video, Modern Masters Minute on Tone-on-Tone Metallic Paint finishes for more ideas.

SURFACE PREPARATION
Follow standard practices and procedures for properly
preparing surfaces for the application of traditional waterbased latex paint. All surfaces to be painted must be entirely
free of dust, dirt, oil, grease, and other contaminants.
Completely remove all loose, flaking, or chalking paint from
the surfaces. Provide adequate ventilation.

APPLICATION
NOTE: Always test the product in a small, inconspicuous
area before beginning a project. We recommend preparing a
sample board prior to beginning a project to check color and
technique. The paint should be mixed thoroughly before
using.
Modern Masters Matte Metallic paints can be brushed,
rolled, or spray applied onto any paintable, properly primed,
interior surface, such as walls, ceilings, columns, trim, doors,
furniture, and paintable wallcoverings.
Do not apply in temperatures below 58°F/14°C or above
85°F/29°C.
BRUSHING: Use a high-quality brush recommended for
water-based latex paints.
ROLLING: For best results use a high-quality synthetic 3/8″
nap roller to apply Matte Metallic paints to large surfaces,
such as walls. Use a 4-inch ‘sausage roller’ (such as a
Whizz™ roller) with a 3/8″ nap for cutting in corners, ceilings,
and baseboards. Work in approximately 4-foot wide, cutting
in the edges as you go along. Apply in a straight up and
down motion, ceiling to floor (versus a ‘W’ motion), and finish
the surface by back-rolling in one direction, ceiling to floor.
This technique will minimize lap marks, properly orient the
metallic paint particles, and ensure a uniform surface.

PERFECT FOR:

• DIY Craft
• Hospitality
• Commercial/Retail
• Residential
• Corporate Offices
• Casinos
• Theme Parks

Water-based, low VOC, inter-mixable, interior, exterior, easy to use, brush applied, roller applied, spray applied.