Old Masters Gel Stain 946ml

Surface Preparation for Old Masters Gel Stain 946ml
All surfaces must be clean, dry and free from dirt, wax, grease, glue, and other
contaminants or penetration and adhesion will be affected. Wood surfaces must
be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with
mineral spirits. Surface defects should be repaired with an appropriate patching
material.
WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS
TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Clean up carefully
with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and
your family by contacting the National Lead Information

Application for Old Masters Gel Stain 946ml
Stain application varies based on surface material. Please see application
instructions below.
Application on Bare Wood: Apply stain liberally with brush or soft rag and remove
excess, wiping in the direction of the grain. For a darker color, re-stain when first
coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before
stain has dried.
Application on Fiberglass & Composition Surfaces: Stain one section or panel at a
time. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and
work the stain across and into the grain uniformly, feathering out streaks while the
stain is wet. Wipe brush often on a lint-free rag to remove excess stain.
Application over Painted Surfaces: To create a simulated wood look, apply stain
to painted surface with foam or bristle brush or cheesecloth using long, smooth
strokes. Realistic woodgrain patterns can be created by using the Old Masters
Wood Graining Tool, as illustrated in the Old Masters Wood Graining Booklet.
Application over Previously Finished Surfaces: Scuff sand surface before
application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic
brush or lint-free rag and work the stain across and into the grain uniformly,
feathering out streaks while stain is wet. Wipe brush often on a lint-free rag to
remove excess stain.
If applying stain exteriorly, topcoating with an exterior clear finish is strongly
recommended.

visit our sister sitehttps://www.antiquerssupply.com/english.html