Timbermate Water Base Wood Filler

Description

Timbermate Water Base Wood Filler is an interior grade, water-based wood filler. It is different from all other solvent or acrylic-based fillers in that it contains no toxins or VOCs. Timbermate Wood Filler is the perfect product to fill imperfections in furniture, drywall, MDF, paneling, and flooring. Guitar and violin makers worldwide prefer to use Timbermate Wood Filler for grain filling their instruments.

to colour timbermate you can use  general finishes or old masters gel stan

Specifications for Timbermate Water Base Wood Filler

• Fills holes and cracks;Fills and flattens the grain of the wood;Will not shrink;Will not sink;Will not crack; Will not fall out; Can be screwed, nailed and drilled; Compatible with all dyes, oils, varnishes and any other water or oil based finishes; Freeze thaw stable; Unlimited shelf life / Can be reconstituted with a few drops of warm water when it has dried; Cleans with water; Non-toxic / Safe for food surfaces; Solvent free, 0 VOC; Interior grade; Available in 13 pre-mixed colors;
• Available in Tinting Base/Natural to produce custom colors;Can be mixed with oil or water based stains and/or dyes for custom For Spot Patching.
• 1. APPLY:  Timbermate Water Base Wood Filler If staining, use Timbermate Natural/Tint Base. Otherwise match the color to the wood. Using a plastic or high quality stainless steel putty knife, apply Timbermate to the floor directly out of the tub prior to the last sanding. (NOTE: If filler turns black, the putty knife is not high content stainless steel; however, the black will sand off.)2. FILL: If hole is greater than 1/4″, fill by
  layering Timbermate in 1/4″ increments. 3. DRY: Let Timbermate dry thoroughly. Use a heat gun or similar to speed drying time if desirable. (Timbermate is properly dry if it sands to the consistency of baby powder.) 4. SAND: Final sand and remove all dust and debris.
  5. STAIN: Apply stain to the floor (if staining). 6. FINISH For Grain Filling (filled finish) 1. MIX: If staining, use Timbermate Natural/Tint Base. Otherwise match the color to the wood. Mix Timbermate in the tub with warm water (a mixer attached to a heavy duty drill is ideal).
  Slowly pour the water in as you mix – Timbermate should have the consistency of thick paint. Allow Timbermate mixture to dry to the consistency of toothpaste before sealing tub. 2. APPLY: Just before the final hard plate or screening, apply Timbermate by flooding the floor and squeegee it across the grain over the entire floor. Do not apply Timbermate too heavily – a
  small amount goes a long way. Remove all excess Timbermate (return excess to the Timbermate  container-no waste). 3. DRY: Let Timbermate dry thoroughly. Use a heat gun or similar to speed drying time if desirable. (Timbermate is properly dry if it sands to the consistency
  of baby powder.) 4. SAND: Final hard plate or screen and remove all dust and debris. (NOTE: Do
  not use a grit coarser than 120.) 5. STAIN: Apply stain to the floor (if staining).
  6. FINISH COAT: Apply any final finish coat.
• specshttps://tembi.ca/media/catalog/spec/tm-brochure-engpdf.pdf