- Water-base primer-sealer
- Interior and exterior
- Sticks to all surfaces without sanding
- Seals stains, graffiti, and tannin bleed
- Mold & mildew resistant film
- Rust inhibitive – great for new metal
- Fast 1-hour dry time
- PRODUCT APPLICATION
Zinsser Water Base Primer 3.78L Surfaces should be clean, dry, sound and free of dust, dirt,
excessive chalky material, grime, grease, oil, wax, mildew,
wallpaper, adhesive or any contamination that may interfere
with adhesion. If unsure of cleanliness, always wash surface
with an appropriate ammoniated cleaning solution or solvent
(do not use TSP as a cleaner). Remove any peeling and/or
unsound coatings. Scuff sand bare aluminum. Sand any
remaining paint film edges smooth with the surface. Lightly
sand exposed exterior wood with 80 to 100 grit sandpaper to
remove loose or weathered wood fibers and mill glaze. - PRIMING
Zinsser Water Base Primer 3.78L on all types of bare or painted surfaces including wood,
drywall, cured plaster, concrete, stucco and masonry,
aluminum, vinyl, steel, galvanized metal and PVC. It has
excellent adhesion to dense glossy surfaces such as enamel
paints and varnishes, paneling, laminates and ceramic tile
without sanding or de-glossing.
SEALING
Contains a unique resin that seals porous surfaces and
provides a smooth and even finish to extend the coverage of
topcoats and provide uniform and consistent sheen. It helps
bind chalky surfaces and is suitable for use on moderately
chalked aluminum or previously painted siding and trim.
STAIN BLOCKING
Bulls-Eye 1-2-3 Primer effectively blocks stains from grease,
handprints, asphalt, crayon, graffiti, rust stains, light water
stains and cedar or redwood bleed. Note: When priming
over bare cedar or redwood, allow 24 hours dry time before
painting. Certain applications may require a second coat of
primer. Prime severe water and smoke stains and block
associated odors with Zinsser B-I-N Ultimate Stain-Blocker - visit our sister site https://www.antiquerssupply.com/
Reviews
There are no reviews yet.